How to Remove Bifolding Doors?

Bifold doors save space in closets, pantries, and between rooms. But sometimes, you need to take them down. Maybe you’re replacing them, fixing them, or updating your space. The good news? Remove bifolding doors is easy and takes only a few tools.

Tools You Will Need

You’ll need these:

• Phillips screwdriver
• Flathead screwdriver
• Pliers (if needed)
• Step ladder (for higher installations)

Step-by-Step Guide to Remove Bifolding Doors

If you want to remove bifolding doors in Los Angeles, CA, all you need to do is follow these steps if you are replacing them or just making changes:

Step 1: Open the Doors

Start by fully opening the bifold doors. This gives you clear access to the hinges, pivot points, and track hardware. Make sure the doors are steady and won’t move suddenly while you work. If they feel wobbly, hold them in place with one hand as you examine the hardware.

Step 2: Find the Pivot Points and Track Hardware

Look at the top of the door, where it connects to the track. You’ll see a pivot pin holding it in place. The bottom of the door has another pivot pin resting in a floor bracket. Some bifold doors also have a guide pin that slides along the top track. Understanding where these pieces are will help you remove them easily.

Step 3: Release the Top Pivot

Use a flathead screwdriver to press down on the spring-loaded top pivot pin. This pin holds the door in the track, so pressing it down will release the door’s grip. Once the pin loosens, gently pull the top of the door slightly toward you. If your door has a guide pin, slide it along the track until it comes free.

Step 4: Remove the Bottom Pivot

To remove bifolding doors, lift the door straight up to release the bottom pivot pin from the floor bracket. If the pin won’t budge, grab a pair of pliers and gently twist while pulling upward. The pin should pop out easily. Once you get it free, tilt the door outward and away from the frame.

Step 5: Take the Door Out of the Track

Now that both pivot pins are released, tilt the door outward at an angle. Slowly slide the top of the door out of the track. If your bifold door has multiple panels, repeat the same steps for each one. Keep a firm grip so the door doesn’t fall or scratch the floor.

Step 6: Remove the Track (Optional)

If you plan to remove bifolding doors permanently, you should take out the track, too. Use a Phillips screwdriver to unscrew the track from the door frame. Work carefully to avoid stripping the screws. Once the screws are out, pull the track down gently. If it’s stuck, wiggle it back and forth until it loosens. Be careful not to damage the surrounding walls or ceiling.

How to Remove Bifold Doors with Top Track?

To remove bifolding doors with a top track, you just need to follow these steps to do it safely:

1. Fully open the doors to access the pivot pins and track hardware.
2. Locate the top pivot pin in the track and the bottom pivot pin in the floor bracket. Some doors also have a guide pin on the top track.
3. Press down on the top pivot pin with a flathead screwdriver. This loosens the door. If there’s a guide pin, slide it out.
4. Lift the door straight up to free the bottom pivot pin. Use pliers if it’s stuck. Tilt the door outward.
5. With both pivot pins released, angle the door outward and slide it out of the track. Repeat for each panel.
6. To remove the track, unscrew it from the door frame with a Phillips screwdriver. Wiggle it loose if needed.

Why Choose Teza Bifold Doors in Los Angeles, CA?

Teza Doors makes high-quality bifold doors in Los Angeles, CA, that are installed and removed easily. Strong tracks and smooth pivot systems of our doors will keep them sturdy and simple to adjust. With modern designs and top materials, these doors look great and work effortlessly in any space. Interested? Contact us today and get a FREE estimate.

The Bottom Line

It’s quick and easy to remove bifolding doors just with just a few tools. All you need to do is follow the steps mentioned to replace, repair, or renovate your door safely. Following our simple process helps you avoid damage and get the job done smoothly.

FAQ